Aka-Allegran 3
Aka-Allegran 3
Fine grinding 9 - 3 µm.
Aka-Allegran replaces a number of grinding steps, typically P320 - P1200 with one single step.
Aka-Allegran-3 a medium hard Allegran and is typically used from 150 HV to 800 HV.
Ready to use and needs no maintenance.
Ø 200, 250, 300, 350 mm
General Info
Aka-Allegran and Aka-Largan are rigid fine-grinding/polishing discs. They provide a unique system for material removal. Built-in abrasive is released when diamond suspension or spray is added during preparation. This unique abrasive system results in high material removal, perfect planeness and a very long lifetime.
Upon delivery the discs are ready to use and need no maintenance.
Aka-Allegran is available in three different versions for the preparation of materials with a hardness higher than 150 HV.
Aka-Allegran 9, the hardest disc in the range, is used with 15 to 3 μm diamond suspension or spray for fine-grinding of materials with a hardness above 450 HV. It will replace the grinding steps from P320 - P1200 with one single step.
Aka-Allegran 3, a medium hard disc is used with 6 to 3 μm diamond suspension or spray for fine-grinding of materials with a hardness above 150 HV. It will replace the grinding steps from P320 - P1200 with one single step. Used with 6 μm diamonds it will produce perfectly flat samples ready for a final polishing with 1 μm.
Aka-Allegran 1, the softest disc in the range is used for the preparation of materials with a hardness above 150 HV. It can be used with diamond suspension or spray with grain sizes as small as 0.1 μm and can then even be used as a final polishing step, resulting in outstanding planeness.
Real Solutions for Metallographic Matters in All Industries
Worldwide Distribution
We Seek New Distributors in All Countries! Feel Free To Contact Us!
Steel- Iron and Casting Industry
.
Automobile Industry
.
Aerospace and Defence Industry
.
Heat Treatment Industry
.
Mine Industry
.